the most demanded expansion

high current control

It contains 4 SHUNT up to 400A with temperature sensor. This allows us to obtain the reading of inverter and charger up to 4,800W as well as booster and solar regulator up to 300A.

INVERTER

You can connect through the shunt an inverter up to 4,800W or 400A to obtain a real-time current measurement. If you also want to be able to turn on or off the equipment you can do it through a relay output available for this use.

CHARGER

You can connect through the shunt a battery charger up to 4,800W or 400A to obtain a real-time current measurement. If you also want to be able to turn the equipment on or off, you can do it through a relay output available for this use.

BOOSTER

You can connect through the shunt a booster up to 300A to obtain a real-time current measurement. 

SOLAR

You can connect through the shunt a regulator up to 300A to obtain a real-time current measurement. If you also want to be able to activate or deactivate the load from the motor whenever you want or have the smartmodes do this function, you can do it through the relay output available for this use.

INVERTER/CHARGER COMBI

If the equipment installed is a combi, no problem, just install the equipment as described in the manual and you will be able to obtain the reading in the same way.

BOOSTER/SOLAR COMBI

If the equipment installed is a combi, no problem, just install the equipment as described in the manual and you will be able to obtain the reading in the same way.

TEMPERATURE SENSOR

Each shunt in the unit has an integrated temperature sensor that monitors the temperature generated by the SHUNT. The system can send alerts or shut down the loads if the set levels are exceeded.

RELAY OUTPUT

In the expansion you will find 4 relay outputs, one for each shunt to be able to make an effective cut of that consumption and / or load both on demand from the screen, mobile etc.. as automatically by the system as security or as part of the operation of a Smartmode. In addition, you can use this output to activate the REMOTE inputs of the equipment.