Description
Mark: WEBASTO
Model: THERMOPRO 90
CONNECTION: ANALOGUE
CONNECTION:
Pin 3 of block X8 and the original power wires will be used.
|
BLOCK 27 |
1 | + | +12 VDC | RED |
| 2 | – | GND | BLACK | |
| 3 | SIGN | NO USE | — | |
| 4 | SIGN | NO USE | — | |
| 5 | SIGN | NO USE | — | |
| 6 | SIGN | NO USE | — | |
| 7 | SIGN | RUNNING SIGNAL PIN 3
CONNECTOR X8 |
BLACK | |
| 8 | SIGN | NO USE | — |
In case of increasing the cable distance, the cross-section must be properly calculated.
CONNECTION DIAGRAM:
CONFIGURATION:
Go to “Professional Settings” and under BOILER, select WEBASTO THERMOPRO 90
This type of connection does not allow error reading or diagnostics, to have these two options you must use the Webasto CRONUS module and connect the heater via LIN.
Reviews
There are no reviews yet.