the most demanded expansion

high current control

Contains 4 SHUNT up to 400A with temperature sensor. This allows us to obtain the reading of the inverter and charger of up to 4,800W as well as of the booster and solar regulator of up to 300A.

INVERSOR

You can connect an inverter of up to 4,800W or 400A through the shunt to obtain a current measurement in real time. If you also want to be able to turn the equipment on or off, you can do so through a relay output available for this use.

CARGADOR

You can connect a battery charger of up to 4,800W or 400A through the shunt to obtain a current measurement in real time. If you also want to be able to turn the equipment on or off, you can do so through a relay output available for this use.

BOOSTER

You can connect a booster up to 300A through the shunt to obtain a current measurement in real time.

SOLAR

You can connect a regulator of up to 300A through the shunt to obtain a current measurement in real time. If you also want to be able to activate or deactivate the charge from the motor whenever you want or have the smartmodes perform this function, you can do so through the relay output available for this use.

COMBI INVERSOR/CARGADOR

If the installed equipment is a combi, there is no problem, you just have to install the equipment as it appears in the manual and you will be able to obtain the reading in the same way.

COMBI BOOSTER/SOLAR

If the installed equipment is a combi, there is no problem, you just have to install the equipment as it appears in the manual and you will be able to obtain the reading in the same way.

TEMPERATURE SENSOR

Each of the shunts in the equipment has an integrated temperature sensor that monitors the temperature generated by the SHUNT. The system can send alerts or turn off the loads in case of exceeding the configured levels.

RELAY OUTPUT

In the expansion you will find 4 relay outputs, one for each shunt to be able to make an effective cut of that consumption and/or load both at the request of the screen, mobile phone, etc., as well as automatically by the system as security or as part of the operation of a Smartmode. Also, you can use this output to activate the REMOTE inputs of the equipment.